Wind Turbine off-Grid System of The on Grid Wind Turbine Controller 10kw

• Warranty: 2 Years
• Condition: New
• Certification: CE
• Application: Wind Controller
• Rated Voltage: AC220V / 380V
• Customized: Yes
• Model NO.: C0003-20
• Type: on Grid Wind Turbine System
• Product Name: Wind Turbine Controller
• Transport Package: Carton/Wooden Package
• Trademark: SAMU
• Origin: China
• Production Capacity: 5000PCS/Year

Product Description

Wind turbine off-grid system of the On Grid Wind Turbine Controller 10KW

Product Description

Place of Origin: Jiangsu, China

Warranty: 20 years

Work Time (h): >10 hours

Product name: Wind turbine Controller

Rated Power: 10KW

PWM constant voltage: ≥550dc

PWM dump load fuse: 20A

Fuse of DC output: 30A

Weight: 25kg

Size: 650*470*340

Function: Rectifier,control, DC output

Work environment temperature: -30-60°C

Wind turbine rated power	10KW
Wind turbine Max. power	20KW
Function	Rectifier,control, DC output
Automatic protection function	Over voltage protection, network electric cut off protection, regulated supply output, arrester
Manual function	Manual brake, reset, emergency switch
Display mode	LCD
Display content	Wind turbine voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM constant voltage	≥550dc
wind turbine 3-phase dump load voltage	580±5Vdc
Time-lapse of the wind turbine 3-phase dump load	12-20 min
PWM dump load fuse	20A
Fuse of DC output	30A
Work environment temperature	-30-60°C
Relative humidity	<90% No condensation
Noise (1m)	<40dB
Degree of protection	IP20(Indoor)
Cooling method	Forced air cooling
Communication interface (optional)	RS485/USB/GPRS/WIFI/Ethernet
Size of the controller (mm)	650*470*340
Weight of the controller	25Kg
Size of the dump load (mm)	750*530*600
Weight of the dump load	44Kg

Product introduction

On Grid Wind Turbine System

The On grid wind turbine system is composed of wind turbine, on grid controller, on grid inverter,metering device, and power distribution system. Wind energy is converted into AC electrical energy by the wind turbine, and then converted into DC electrical energy by the on grid controller, and then DC electrical energy is converted into AC electrical energy of the same frequency and phase as the grid by the on grid inverter, and part of the power is supplied to the local load. Surplus power is fed into the grid.

 

Performance characteristics of on grid wind turbine controller

1 This product is produced according to the industry standard JB/T6939.1-2004 and the national standard GB/T19115.1-2003. It can also be produced according to the technical requirements of users.

2 Color touch screen display. Visually display the working status of the controller. Rich data display: real-time wind turbine
voltage and current, solar panel voltage and current, DC output voltage and current, and cumulative power generation

3 The technical parameters of the controller can be adjusted through the touch screen. The control parameters can be adjusted for different wind turbines.

4. Two sets of control systems are adopted, PWM constant voltage and constant current system +three-phase braking system.

5 Current control, wind speed control and wind turbine speed control can be added, and the control parameters can be set.

6 In the case of strong winds, the constant voltage and constant current output of the controller provides DC constant voltage power to ensure the normal operation of the inverter.

7 When the on grid inverter is offline, the controller outputs a constant voltage and waits for the inverter to return to work.

8 When the grid is cut off, the controller will automatically control wind turbine brake and the inverter will stop output to grid. When the grid resuming, the controller stops brake wind turbine and the inverter will resume power supply.

9 The inside of the controller is equipped with surge protector. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On another way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.

10 Controller has an emergency stop switch, in case of emergency, when the button is pressed the front panel, cut off all power supply of the controller and the wind turbine will immediately brake.

11 The controller has a manual brake switch. To using this switch, the wind turbine will brake.

12 Using Modbus communication protocol. Convenient for customers to conduct secondary development.

13 Support RS485, WiFi, GPRS, Ethernet and other communication methods. You can monitor the working status of the on grid wind power generation system in real time through the PC or mobile phone , and you can also query the historical working status. The mobile terminal is compatible with Android and IOS. All data can be connected to the Internet of Things.

14 The solar panel control system can be added according to customer needs.

15 The controller can add various control functions such as yaw control, pitch control, mechanical folding tail control,
mechanical brake, hydraulic brake, electromagnetic brake, etc. according to the type of wind turbine.

 

 

 

Company Profile

 Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.

Packaging & Shipping

FAQ

Q1:Which model wind generator is suitable for me?
A1: Plese contact with our sales, Sanmu will help you choose the most suitable model for you.